Aerators


			PowerStream Aerator The PowerStream Aerator features a venturi air intake at the top of the discharge head to maximize the oxygen entering the livewell water. The longer mixing tube directs this mixture directly to the depths of the livewell and is then discharged horizontally well below the water line through the discharge nozzle at the bottom of the tube. The discharge nozzle is adjustable and can be rotated 360º. Since the thru-hull fitting and venturi intake are mounted above the livewell water line, it can be used with either a transom mounted fill pump or a livewell mounted recirculation pump without worry of water being siphoned out when the pump is off. It includes a special elbow thru-hull fitting.

			PowerStream Nozzle Aerator The PowerStream Nozzle features a venturi air intake in the top of the nozzle that draws additional oxygen into the water as it enters the livewell. Unlike typical overhead spray heads, oxygen rich water immediately penetrates the deepest livewells with ease and can be rotated left or right for a circular current of the livewell water. A special elbow thru-hull fitting is included.

			Pump-Out / Aerator Combo The Flow-Rite Pump-out Aerator provides a superior method of pumping out livewells and baitwells while eliminating the need for separate diversion valves, cables, actuators, pumps or electrical components required with other methods. It also eliminates most of the plumbing associated with other methods and only requires a single discharge hose to be run to the discharge fitting.

			Power-Jet Aerator The Power-Jet aerator is designed to be mounted well below the surface of the livewell for direct introduction of fresh oxygenated water. It can be used with systems 2, 3, or 4, or a livewell mounted aerator pump only. (It is not for use with a transom mounted pump.) Includes a special air intake fitting with gasket and nut.

			Spray Head Aerator Spray head may be rotated to promote livewell water circulation